BACHFIRE E 120 is an automatic fire curtain that limits and controls the fire in the event of a fire. Classified E 120. The curtain consists of a fiberglass fabric with a polyurethane coating on both sides, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 78 mm. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Tested according to EN 1634-1 and classified according to EN 13501-2 and also complies with the conditions and procedures for CE marking as set out in EN 16034.

BACHFIRE CONFLEX EI 120 is an automatic fire curtain that, in the event of a fire, limits and controls the fire that occurs on conveyors, reducing not only heat radiation but also heat transfer, creating fabric insulation, so that the protection of people and goods is maximum. With classification EI 120. The curtain consists of a fiberglass fabric coated on both sides with polyurethane, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 78 mm. The main body of the curtain, side guides and bottom bar are made of galvanized steel (customizable, depending on the type of conveyor belt). Tested and approved according to UNE EN 1366-7:2006.

BACHFIRE EGRESS is an automatic fire curtain that limits and controls the fire in the event of a fire. Classification E 120. With a built-in door that allows people to evacuate. The curtain consists of a fiberglass fabric with a polyurethane coating on both sides, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 78 mm. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Tested according to EN 1634-1 and classified according to EN 13501¬2, and also complies with the conditions and procedures for CE marking as set out in EN 16034.

BACHFIRE EW 120 is an automatic fire curtain that, in the event of a fire, limits and controls the fire and reduces heat radiation 1 m from the fabric to a level below 15kW/m2.K. Classification EW 120. The curtain consists of a fiberglass fabric covered with aluminum foil on both sides, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 78 mm. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Tested according to EN 1634-1 and classified according to EN 13501-2 and also complies with the conditions and procedures for CE marking as set out in EN 16034.

BACHFIRE H is a horizontal automatic fire curtain that limits and controls the fire in the event of a fire. With classification EW 60. The curtain consists of a fiberglass fabric with a polyurethane coating on both sides, sewn together with reinforced steel wire and attached to two 78 mm diameter steel rollers. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Tested according to EN 1634-1 and classified according to EN 13501-2.

BACHFIRE UL10D is an automatic fire curtain that limits and controls the fire in the event of a fire. UL 10D rated: 180 minutes. The curtain consists of a fiberglass fabric with a polyurethane coating on both sides, sewn together with reinforced steel wire and attached to a 78 mm diameter steel roller. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Tested and classified according to UL10D:2014 “Fire Testing of Fire Curtain Structures”, APF certified.

BACHFIRE Z is an automatic fire curtain that limits and controls the fire in the event of a fire. With classifications E120 and EW 20. This system can be adapted to irregular geometric open or closed frames to avoid vertical beams. The curtain consists of a fiberglass fabric coated on both sides with polyurethane, sewn with reinforced steel wire and attached to a 2mm plate inside the main body and to the bottom bar. The main body of the curtain, the side guides and the bottom bar are made of galvanized steel. Tested according to EN 1634-1 and classified according to EN 13501-2.

MEGAFIRE is an automatic fire curtain that limits and controls fire in the event of a fire. With classifications EI60 and EII20. The curtain consists of a heat-expanding coated fiberglass fabric, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 89 mm. The main body of the curtain and side guides are made of galvanized steel. Tested according to EN 1634-1 and classified according to EN 13501-2 and also meets the conditions for CE marking as stipulated in EN 16034.

SUPERFIRE is an automatic fire curtain that, in the event of a fire, limits and controls the fire by reducing not only heat radiation but also heat transfer, creating fabric insulation, so that the protection of people and goods is maximum. With classification EI 120. The curtain consists of a fiberglass fabric coated on both sides, sewn together with reinforced steel wire and attached to a 78 mm diameter steel roller. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Irrigation system on the opposite side to the fire. Tested according to EN 1634-1 and classified according to EN 13501-2

SUPERFIRE is an automatic fire curtain that, in the event of a fire, limits and controls the fire by reducing not only heat radiation but also heat transfer, creating insulation in the fabric, so that the protection of people and goods is maximum. With a classification of EI 120. The curtain consists of two fabrics, one of which is a pleated fabric and the other is a smooth fabric. Both are made of fiberglass fabric, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 78 mm. The main body of the curtain, side guides and bottom bar are made of galvanized steel. Irrigation system on the smooth fabric side. Tested according to EN 1634-1 and classified according to EN 13501-2.

HEMPEL Hempafire 550 Extreme epoxy based fire retardant paint is for the protection of steel structural elements up to fire resistance class R240 and environmental class C5 (resistance class X) ETA 24/0660.

HEMPEL Hempafire 315PRO and Hempafire 315PRO FD (Fast Dry) solvent based fire retardant paint for steel structures up to R90.

Hemapfire Pro 320 solvent based fire retardant paint for steel structures up to fire resistance class R120

HEMPEL Hempafire 400PRO and Hempafire 400PRO FD (Fast Dry) solvent based fire retardant paint for steel structures up to R120.

HEMPEL Hempafire Opitma 500 waterborne fire retardant paint for steel structures up to R180

HEMPEL Hempacore AQ waterborne fire retardant paint for steel structures up to R90

HEMPEL Hempafire XTR 100 two-component polyurethane fire retardant paint for steel structures up to R240

Fire protection of steel structures up to fire resistance class R240

Promatect®- 100X fire barrier for ceilings and walls up to fire resistance class EI120

Promatect®-100 fire barrier board for timber constructions up to fire resistance R90

Promatect®- LS fire barrier board for ventilation and cable ducts Ei30-180

Promaxon®- TYPE A fire-resistant board for wooden structures, partitions and walls up to fire resistance class REI120. As well as sealing ventilation fire dampers with SW panels.

Ventilation and smoke extraction ducts of non-combustible low density calcium silicate boards up to fire resistance class EI180.

Promatect®- H fire barrier board for fire protection of steel and concrete structures up to fire resistance class REI240.

PROMATECT®- L fire barrier slab

Durasteel strong composite fire barrier board for wall and ceiling constructions up to fire resistance class EI240

PROMAT® – GLUE 84K for bonding fire-resistant tiles to each other and to different surfaces.

PROMAT® Ready MIX PRO filler for jointing and bonding fire-resistant tiles

PROMAT® Filler PRO for filling and bonding of fire stop joints.

HYDROTON Liquid Electrical Tape for fast drying insulation and protection of electrical wiring and connections.

HYDROTON Fillton 1.0 two component epoxy plaster for all surfaces above and below the waterline.

HYDROTON Polymar Varnish one component, fast drying, glossy polyurethane marine varnish for wood, metal and polyester surfaces

HYDROTON Yacht Enamel one component alkyd enamel paint for interior and exterior use

HYDROTON Polymar 1K one component high gloss fast drying topcoat

HYDROTON Acryl 2K Finish two component acrylic polyurethane topcoat for painting boats, yachts, ships etc.

HYDROTON Antios Epoxy Primer is a two component epoxy primer for steel and aluminium primers.

HYDROTON AFAR one component primer for toxic paints below the waterline.

HYDROTON AF IKAN XT self-insulating noise paint for boats (except aluminium boats) up to 30 knots.

HYDROTON AF IKAN 03 self-insulating noise paint for boats (except aluminium boats) up to 40 knots.

HYDROTON AF IKAN 04 is a self-sealing noise paint for boats up to 40 knots.

PROMAPAINT® SC4 waterborne fire retardant for concrete structures up to fire resistance class R120

HEMPEL Hempacore ONE waterborne fire retardant paint for steel structures up to R180

Promadur® TopCoat protective topcoat for Promadur® fire barrier roofing

PROMADUR® transparent fire-resistant varnish for wooden structures up to fire resistance class R60

The firestop stain for wood is a unique product that no one else in the world except MultiPro System produces.