BACHFIRE CONFLEX

BACHFIRE CONFLEX EI 120 is an automatic fire curtain that, in the event of a fire, limits and controls the fire that occurs on conveyors, reducing not only heat radiation but also heat transfer, creating fabric insulation, so that the protection of people and goods is maximum. With classification EI 120. The curtain consists of a fiberglass fabric coated on both sides with polyurethane, sewn together with reinforced steel wire and attached to a steel roller with a diameter of 78 mm. The main body of the curtain, side guides and bottom bar are made of galvanized steel (customizable, depending on the type of conveyor belt).

Tested and approved according to UNE EN 1366-7:2006.

Category:
Loading...

Description

The system can be activated by a smoke exhaust system (SHEV), a fire alarm contact, internal fire and smoke detectors or manually operated emergency buttons. In the event of a fire, the control panel (CBM) receives an alarm signal and the automatic curtain automatically deploys, with a controlled and safe constant lowering speed even after a complete power failure of all curtains. A magnetic valve connected to the control panel opens the irrigation system. In the event of a false alarm, the curtains automatically return to standby mode once the alarm has been reset by the fire control system. In the event of a mains power failure, the curtain remains fully retracted for up to 6 hours thanks to a battery-based backup system.

The entire system is driven by a 24 V tubular motor and is controlled by an electronic board, CRM (Motor Control System) with a special gravity fail-safe system (Special Gravity Fail-Safe System). The device has an automatic curtain control panel (CBM) with a nominal input voltage of 220 V and an output voltage of 24 V. Uninterruptible power supply (UPS system) with an autonomous power supply duration of up to 6 hours.

System advantages:

– Concealed fire partition and fire compartment system
– Perfect combination of architecture and fire safety
– Integrated system with central fire detection system
– Easy to install and maintain
– Gravity fail-safe system
– Low consumption
– Battery-based backup power
– Obstacle detection system (optional)